DSP upgrade kit for D/K40 small machine -- Help

[TimAustinTX]

So I got my DSP upgrade kit for D/K40 small machine in and the manual found linked on the forum is missing a lot of information.

There is nothing about the power display, kill switch, or any details of the wiring to the DSP.

Any help would be appreciated.

Tim

[TimAustinTX]

Anyone have any installation information for the Isolated Power Module that comes in the kit?

Tim

[Tech_Marco]

viewtopic.php?f=16&t=1759

viewtopic.php?f=14&t=187


Marco

[TimAustinTX]

Thank you that is what I needed!

I have a new issue. I got the whole thing installed and I am having two issues.

1: The red light comes on the power supply when the laser should be firing but its not working. If I press the test button on the PSU it work but when I run the program it is not firing.

2: When I am trying to run a test through the LaserCad program it appears that the machine is trying to run a much more intricate cut. I can not see what it is as the laser is not firing but it's not a box.

Thank you,
Tim

[TimAustinTX]

So we resolved the issues it appears. The diagram provided did not show the required jumper for the laser power supply.

Tim