Lightobject.com Support Forum

Hello!!

Is it possible to someone to provide me the PINOUT for the DSP controller (AW608) and the LCD control panel, because I lost the cable, I was trying to make an extension cable, and when I went to the electronics shop i didn't realize I left the cable inside the TAXI. (Yes I know, I am an idiot )

Actually I don't need the pinout, I just want to know how to re do the cable (Allready bought the cable and the matching connectors).

Is it just a direct connection? I mean Pin 1 in the DSP goes to the Pin 1 in the LCD?

DSP Side................................................LCD Side
-------------------CABLE-----------------------
Pin 1 «----------------------------» Pin 1
Pin 2 «----------------------------» Pin 2
Pin 3 «----------------------------» Pin 3
Pin 4 «----------------------------» Pin 4
Pin 5 «----------------------------» Pin 5

Maybe some one can take a picture to the cable (both terminal connectors)
Please someone help me.. !! Thanks in advance..

Here ya go...

If you can't make it. let me know and I'll send you another one

Christmas gift

Marco

Thank you very much!!

Allready did my new cable, and it works great!! THANKS!!

By the way, How long this cable can be without some kind of signal degradation?, I make mine 3 meters long? Is this OK?

Thanks again SScnc for your kind support, and thanks Tech_Marco for your great offer.