Lightobject.com Support Forum

Posted: **Sun Feb 01, 2015 9:02 pm**

I have the X7 DSP hooked up to my laser and have it working good with the stepper motors but need info on hooking it to my laser power supply. I have looked at the 608 manual but it is not the same. Here are the connections on each. Both were purchased from Marco.

Thanks,
BIll

: X7 DSP to PS?; X7 DSP to PS.jpg (77.19 KiB) Viewed 1991 times

Posted: **Mon Feb 02, 2015 6:00 am**

I will go with this and see what happens.

: X7 DSP to PS-2.jpg (51.42 KiB) Viewed 1978 times

Posted: **Mon Feb 02, 2015 7:32 pm**

That worked. Also connect WP to G on laser PS.

Posted: **Sun Mar 22, 2015 6:15 am**

I had to connect the WP to ground on BOTH the laser PSU and the LO-X7 to get it to fire.

Lightobject.com Support Forum

X7 DSP to Laser PS

X7 DSP to Laser PS

Re: X7 DSP to Laser PS

Re: X7 DSP to Laser PS

Re: X7 DSP to Laser PS