Page 1 of 1
lasercad 5.5.2 password
Posted: Tue Dec 06, 2011 4:17 am
by crozza
Does nayone know the password to set the paramaters for lasercad 5.5.2
its not ph123.
Re: lasercad 5.5.2 password
Posted: Tue Dec 06, 2011 6:23 am
by wctx1977
Is your board 2012? If so, try 608 or AWC608 as a password. Hope it works!
Re: lasercad 5.5.2 password
Posted: Tue Dec 06, 2011 3:22 pm
by crozza
its a 2012 board..1week old.
no its not AWC or AWC608 or 608.
Anyone got any ideas?
Re: lasercad 5.5.2 password
Posted: Tue Dec 06, 2011 3:28 pm
by Tech_Marco
It's AWC608
608 is the password.
Re: lasercad 5.5.2 password
Posted: Tue Dec 06, 2011 3:43 pm
by crozza
608 worked on the 5th attempt..weird.