Lightobject.com Support Forum

Hi all,

I recently bought a pair of the 20mm Si Plated Reflection Mirrors from this site and when I aligned the mirrors, got the burnt gum from masking tape (vapours only) on one of the mirrors despite putting a piece of 0.8mm ply under the tape to keep the mirror clean.
Can you please advise what is the best way to clean these types of mirrors.
Can I use a cue tip with metholated spyrits and gently rub them clean?
How resilient are they compared to the standard gold plated ones.

Thanks

I found the answer on another site.

http://www.ophiropt.com/co2-lasers-opti ... ng-instruc

Thanks to anyone who looked at this post.