Page 1 of 1
Coreldraw X4 - Missing macro
Posted: Thu Oct 06, 2011 10:48 am
by urbanfixie@gmail.com
I am in the process of installing the 2010 DSP controller in a 40W Chinese laser. According to the Setup Guide when I launch Corel for the second time I am supposed to go to Tools Menu/Customization and from the Macros list drag the "Laser.User.Init" out of the dialog box. Unfortunately I do not have that list on the Macro list (see screen shot). Can anyone help me?
Thanks
Re: Coreldraw X4 - Missing macro
Posted: Thu Oct 06, 2011 11:55 pm
by baccus61
I'm pretty sure you can drag the PHLaserCut.ini out and it will do the trick. It's been a long time since I've done this but I think that will work.
Rich.
Re: Coreldraw X4 - Missing macro
Posted: Fri Oct 07, 2011 10:14 am
by urbanfixie@gmail.com
I can not thank you enough. It worked great.
Re: Coreldraw X4 - Missing macro
Posted: Sat Oct 08, 2011 6:23 am
by baccus61
Glad it worked for you. Score 1 for the good guys.
Marco said his tech people are working on rewriting the manual for the laser software. Unfortunately the hardware progress has overtaken the manual by a couple of revisions and some of the terminology needs to be written to be a bit more clearer for Westerners (or Europeans).
If you need some more info don't forget to read some of the past posts on this forum and also some of the Laser Discussion posts as well.
The good people at SawmillCreek have a very active forum and a lot of good info on laser engraving and sign making and also the forum over at
http://www.buildlog.org
You have a very good software and hardware combination and for the money one of the best around. Enjoy it, I do!
Rich.