Page 1 of 1
X7 controller not saving WP or hardware limit
Posted: Mon Dec 28, 2015 1:10 pm
by spk64
Having problems with X7 controller not saving the settings for water protect or hardware limits.
I am using PW 608 on the controller.
Anyone else seeing this problem?
Re: X7 controller not saving WP or hardware limit
Posted: Mon Dec 28, 2015 1:19 pm
by Techgraphix
Correct.. This is a known "bug" in the combination X7 and LaserCad.. (apparently still not solved)
Just neglect the settings in LaserCad and set them in the X7 directly:
Press Stop an Shift to enter the manufacturer setting and alter the WP settings there..
Kees
Re: X7 controller not saving WP or hardware limit
Posted: Mon Dec 28, 2015 2:02 pm
by Tech_Marco
Actually it isn't a bug. The programmer intended to do that way out of some reason. I already discussed with him and he will try to add it back to the LaserCad. It may 5ake a while because he is working on a new baby DSP controller for me.
Marco
Re: X7 controller not saving WP or hardware limit
Posted: Mon Dec 28, 2015 2:33 pm
by spk64
I found lots of good info here. Also had the stop shift combo.
viewtopic.php?f=8&t=2783&p=13378&hilit=Password#p13378
All is working great now!
Thanks,