Page 1 of 1
Set Time and Date on AWC708C Plus
Posted: Mon Oct 19, 2015 5:34 am
by voguecocktail
Hi,
Howto set the Time and Date on the Controller?
Regards
voguecocktail
Re: Set Time and Date on AWC708C Plus
Posted: Mon Oct 19, 2015 8:44 am
by Techgraphix
You need a program AWCTOOL V1.3 This is password-protected ( but the password is 608111)
This program wil synchronize the AWC708C Clock with the Computer.
Kees
Re: Set Time and Date on AWC708C Plus
Posted: Tue Oct 20, 2015 5:39 am
by voguecocktail
Thanks
Re: Set Time and Date on AWC708C Plus
Posted: Thu Feb 04, 2016 5:16 pm
by overkill71
Thanks Techgraphix, I wanted to point out incase someone didn't know that you need to be hooked up USB to the DSP. I run my programs over Ethernet and realized that when I got a comm error I needed to do USB....Saw the usb.dll file.
Thanks for the program, the date time had been bugging me.
Russell
Re: Set Time and Date on AWC708C Plus
Posted: Mon Feb 08, 2016 1:40 pm
by overkill71
Techgraphix,
Had a question about the date time program, I run the program and it changes it on the DSP correctly but when I power off the machine and then power it back on it resets to what it was before. Any ideas?
Thanks!