DSP Upgrade:: Snag with PSU (SOLVED)
Posted: Sun Dec 14, 2014 12:13 pm
Ok
I am upgrading a K40 to DSP.
I have removed the Moshi board and labeled the cables coming off that.
I have hit a snag with the PSU.
Do I completely remove and replace it. And if I do where does the HV Red Laser tube cable go (the one at the top left of the pic), and how does it come off.
If not...
Then how does the New PSU provided in the upgrade work with the existing PSU. The instructions seem to be written for a much older PSU (the old one had a coke-bottle resister with it , mines does not.)
I am sure more questions will abound.
I am upgrading a K40 to DSP.
I have removed the Moshi board and labeled the cables coming off that.
I have hit a snag with the PSU.
Do I completely remove and replace it. And if I do where does the HV Red Laser tube cable go (the one at the top left of the pic), and how does it come off.
If not...
Then how does the New PSU provided in the upgrade work with the existing PSU. The instructions seem to be written for a much older PSU (the old one had a coke-bottle resister with it , mines does not.)
I am sure more questions will abound.
- PSU and Red HV Anode Laser tube cable