Lightobject.com Support Forum

Posted: **Thu Jun 26, 2014 9:56 pm**

I've upgraded from leetro 6525 and all looks fine except the final product is 12% larger.

The drawings are dfx's which import perfectly into LaserCad and all dimensions are as drawn in CorelDraw X6.

What setting do I need to change?

Any help is appreciated.

Posted: **Fri Jun 27, 2014 4:30 pm**

First thing to look at is the step distance setting

It is found under System Settings / Manufacturer Parameters

Labelled "Um/Pulse" which interprets to, distance the axis moves per one step in micro meters.

Posted: **Fri Jun 27, 2014 10:04 pm**

Thanks Greolt, that worked a treat.

Lightobject.com Support Forum

AWC608 cutting 12% larger on X and Y axis than drawing.

AWC608 cutting 12% larger on X and Y axis than drawing.

Re: AWC608 cutting 12% larger on X and Y axis than drawing.

Re: AWC608 cutting 12% larger on X and Y axis than drawing.