Page 1 of 1
Engrave Beyond Size error
Posted: Mon Jan 06, 2014 9:49 pm
by rushmore1305
hello
i am trying to engrave anything but text, no matter what kind of resolution im using the controller always comes back with an error
can someone plz help me, what am i doing wrong here
Re: Engrave Beyond Size error
Posted: Tue Jan 07, 2014 1:41 am
by waltfl
hi rushmore
reduce the speed or move the object away from the border
greetings
waltfl
rushmore1305 wrote:hello
i am trying to engrave anything but text, no matter what kind of resolution im using the controller always comes back with an error
can someone plz help me, what am i doing wrong here
Re: Engrave Beyond Size error
Posted: Wed Jan 08, 2014 12:06 am
by rushmore1305
Just tried adjusting it and still the same issue!
I think you are right about the close to border
For some reason even when I do a cut if I move the item to say middle of the workspace the controller still starts it at very top right
How do I fix that
I don't get what I'm doing wrong here
Also will post my engrave settings just so u guys can see maybe something is wrong there
Or is there a setting that tells it to start at the top no matter what that I don't know about
waltfl wrote:hi rushmore
reduce the speed or move the object away from the border
greetings
waltfl
rushmore1305 wrote:hello
i am trying to engrave anything but text, no matter what kind of resolution im using the controller always comes back with an error
can someone plz help me, what am i doing wrong here
Re: Engrave Beyond Size error
Posted: Wed Jan 08, 2014 2:23 am
by waltfl
hi rushmore
you need to set the settings on the LCD display to soft and in the option check the right settings
greetings
waltfl
rushmore1305 wrote:Just tried adjusting it and still the same issue!
I think you are right about the close to border
For some reason even when I do a cut if I move the item to say middle of the workspace the controller still starts it at very top right
How do I fix that
I don't get what I'm doing wrong here
Also will post my engrave settings just so u guys can see maybe something is wrong there
Or is there a setting that tells it to start at the top no matter what that I don't know about
waltfl wrote:hi rushmore
reduce the speed or move the object away from the border
greetings
waltfl
rushmore1305 wrote:hello
i am trying to engrave anything but text, no matter what kind of resolution im using the controller always comes back with an error
can someone plz help me, what am i doing wrong here
Re: Engrave Beyond Size error
Posted: Wed Jan 08, 2014 3:23 am
by rushmore1305
ok i was pretty sure i did that
look at these settings plz.
also anyone have link to new lasercad cause im on 6.71
Re: Engrave Beyond Size error
Posted: Wed Jan 08, 2014 3:26 am
by waltfl
hi rushmore
first the laser 2 should always be zero if you don't have two lasertubes.
but you need to check the setting in the manufacturer settings and then on the machione LCD in menue that you have set to soft
greetings
waltfl
rushmore1305 wrote:ok i was pretty sure i did that
look at these settings plz.
also anyone have link to new lasercad cause im on 6.71
Re: Engrave Beyond Size error
Posted: Wed Jan 08, 2014 5:29 pm
by rushmore1305
So great news. I had upgraded my laser cad software to the latest version and the OS on the controller.
All of the issues seemed to have gone away.
I'm able to engrave and everything.
Verry exciting
Re: Engrave Beyond Size error
Posted: Wed Jan 08, 2014 6:12 pm
by Greolt
If you have "Work Space" set wrong, that will also result in the error you are seeing.
These are my settings. Yours may not necessarily be the same.
Re: Engrave Beyond Size error
Posted: Thu Jan 09, 2014 5:24 am
by Telrad
I get that error sometimes when I use the AI method of import. I switched to DXF and the error went away.
