Page 1 of 1
Reduce? power when laser button is pressed.
Posted: Sat Oct 20, 2012 6:20 am
by Telrad
Is there any way to set the output power of the laser when the "laser" button is pressed on the keypad? I would like about 10 -15% power when I press the laser button so I can test my alignment with more accuracy than it currently has. Now it burns through the tape I use with just an instantaneous press.
Re: Reduce? power when laser button is pressed.
Posted: Sun Oct 21, 2012 3:44 am
by waltfl
hi there
you have to manually reduce the power on the display, after you finished and press the start botton it wil go back to your settings
greetings
walt
Telrad wrote:Is there any way to set the output power of the laser when the "laser" button is pressed on the keypad? I would like about 10 -15% power when I press the laser button so I can test my alignment with more accuracy than it currently has. Now it burns through the tape I use with just an instantaneous press.
Re: Reduce? power when laser button is pressed.
Posted: Sun Oct 21, 2012 9:59 am
by Telrad
So, your saying that I have to change the power on the control panel to 15% and it will reduce the laser test button's power? If so, I'll have to try it on monday when I get back to school.
Thank you for the usefull tip!
waltfl wrote:hi there
you have to manually reduce the power on the display, after you finished and press the start botton it wil go back to your settings
greetings
walt
Telrad wrote:Is there any way to set the output power of the laser when the "laser" button is pressed on the keypad? I would like about 10 -15% power when I press the laser button so I can test my alignment with more accuracy than it currently has. Now it burns through the tape I use with just an instantaneous press.