Hi,
My order is arrived so I decided to test it immediatelly. The Output voltage is just a bit lower than the Input voltage.
Let's suppose the Input of EPS-LM2576ADCVR is AC: will I obtain DC voltage on Output? How can I set the voltage?
I am sorry for my profound ignorance about it. There is a component on which is wrote W503/60 with a little screw (as you can see in the img below) so I thought it could be the element useful to set my voltage but turning it nothing change from the Voltmeter. Should I repeat tests? Thanks for the help if someone can reply
![Image](http://www.lightobject.com/Assets/ProductImages/UniversalLM2576.jpg)