
Here are the important files in this archive:

*.AD_ASM, *.AD_PRT           These are Geomagic Design files of the optics parts.
                             You will need a recent Geomagic Design license to open them.


There are two sets of STEP files.  The ones that have the word "Assembly" in their names were
extracted from the Geomagic assembly (these are compound parts, made from smaller parts).

The ones that do NOT have the word "Assembly" are static parts (called "booleans" in Geomagic).  
In Geomagic, an assembly boolean is a single part (sub-parts are all combined to make an assembly
into a single big part).

Which one you use for your design is up to you.   I used the booleans to keep my model tree under control.

Full assemblies:

BeamCombiner_Assembly.stp         LSR-BCMV650M     
HeadAssembly.stp                  LSR-HD2520LR
MirrorAssembly.zip                LSR-PR25M2D

Parts (same model, just as a single part)

LaserBeamCombiner.stp          LSR-BCMV650M     
LaserHead.stp                  LSR-HD2520LR
LaserMirror.zip                LSR-PR25M2D

There are also files for the Reci W2 tube and the tube mounts, but I've customized those slightly.   You'll 
want to use Geomagic to make them correct for your model.

If you _do_ have Geomagic design, there are reference planes in the parts that you can line up to model the path
the laser beam follows.  


All parts are designed in metric units (millimeters).

All parts were drawn by measuring the examples purchased from LightObject.    They are NOT manufacturer models.

ABSOLUTELY NO WARRANTY OR GUARANTEE OF ACCURACY.

The only thing I can say is that it was good enough for my machine :-).






