New Pro XY stage (500x300) Kit and Turn key machine

Post Reply
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

New Pro XY stage (500x300) Kit and Turn key machine

Post by Tech_Marco »

This is a complete kit of PRO530 XY stage with E5 DSP. It is built with 20mm extrusion aluminum. The stage is ready to sell and the extrusion aluminum is available sometimes on July. So, before you're planing to buy similar machine from 'eBay' and then spent $1000 for the upgrade, you may want to consider this one or the turn-key machine!

The machine comes with Element E5 DSP controller card, 500x300 honeycomb, high quality LO 850mm 40W laser tube, PR530 high speed XY stage, 40W laser power supply, DC24V 10A power supply, 30mA analog current meter. Power Z table is included

Optional parts: LO600W water chiller, beam combiner


The max engraving speed is 1500mm/s (max). The optimal speed is 1000mm/s (less time)
Overall size: 940mm x 620mm x 280mm (37" x 24.5" x 11")


Marco
Attachments
PRO530Kit3.jpg
PRO530Kit2.jpg
PRO530Kit1.jpg
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: New Pro XY stage (500x300) Kit

Post by Tech_Marco »

Turn-Key machine update
Attachments
IMG-20160429-WA0008.jpg
IMG-20160429-WA0008.jpg (25.95 KiB) Viewed 6898 times
IMG-20160429-WA0007.jpg
IMG-20160429-WA0007.jpg (45.51 KiB) Viewed 6898 times
IMG-20160429-WA0006.jpg
IMG-20160429-WA0006.jpg (37.47 KiB) Viewed 6898 times
IMG-20160429-WA0005.jpg
IMG-20160429-WA0005.jpg (42.92 KiB) Viewed 6898 times
IMG-20160429-WA0009.jpg
IMG-20160429-WA0009.jpg (36.78 KiB) Viewed 6898 times
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: New Pro XY stage (500x300) Kit

Post by Tech_Marco »

Prototype machine
Attachments
PR530F3800.jpg
PR530F3800.jpg (212.57 KiB) Viewed 6894 times
PR530S1.jpg
PR530F2B.jpg
Post Reply

Return to “Latest News”

Who is online

Users browsing this forum: No registered users and 11 guests