Manuf. Parameters, "Apply" box is not active

marko53
Posts: 6
Joined: Thu Oct 04, 2018 3:42 am

Manuf. Parameters, "Apply" box is not active

Postby marko53 » Fri Nov 16, 2018 11:47 am

Hello,
When working with the parameters the "Apply" button never becomes active. I have tried making changes, then hitting Read, then Save, then Resett on the DSP. The changes don't seem to take affect on the movement of the laser head or the function of the keys on the DSP(they are opposite to what they should be). Thanks, Mark

Tech_Marco
Posts: 4400
Joined: Mon Jun 15, 2009 3:00 pm

Re: Manuf. Parameters, "Apply" box is not active

Postby Tech_Marco » Fri Nov 16, 2018 12:52 pm

What you need to do is "Read, change, then Save". It will ask you for the password. Put down "608" and Reset the controller, the new setting should be taken in effect.

Marco

marko53
Posts: 6
Joined: Thu Oct 04, 2018 3:42 am

Re: Manuf. Parameters, "Apply" box is not active

Postby marko53 » Sat Nov 17, 2018 10:46 am

Knowing the sequence of saving the changes helped. Thanks


Return to “DSP E5”

Who is online

Users browsing this forum: No registered users and 1 guest