JLD 5740 / EPM-5740 on a 150V DC Circuit

[romanbulla]

Hello, we are planning to use the JLD 5740 meters on a 150 V DC circuit via 500A / 75 mV shunt.
My question is: Is the meter going to withstand it if it isn't isolated from the 150V DC ?
The manual refers to Operating Voltage of 9 - 30 VDC, it doesn't specifically address the MAX ISOLATION voltage on the 75 mV input ( from the DC shunt).
THX
ROMAN

[Tech_Marco]

Easy over 600V. Usually 800V~1000V