T9 Raster Engraving Memory

Post Reply
BanksCNC
Posts: 19
Joined: Thu Aug 10, 2017 1:21 pm
Contact:

T9 Raster Engraving Memory

Post by BanksCNC »

T9 Raster Engraving Memory issues.

So my T9 seems to have issues with larger engraves. It will engrave along for like say 30% of say a 10"x6" engrave and then it will stop in different ways..sometimes it throws a comm error...sometimes it just stops (One time it actually had it stop with the tube on in one spot firing at full power...was almost really bad) ...sometimes the laser resets and rehomes...no matter witch sanero happens I can restart the laser and it will give me the option to continue..95% of the time it continues ok and then it will happen later again in the engrave...Now i thought maybe it was a time thing but i can do vector cutting for hours without it happening.

so i'm i hitting a memory issue or something like that?

Thanks
Brandon
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: T9 Raster Engraving Memory

Post by Tech_Marco »

You may try to clean up memory and give it another try
Also, can you send me the file for testing?

Thanks
Marco
(In China)
BanksCNC
Posts: 19
Joined: Thu Aug 10, 2017 1:21 pm
Contact:

Re: T9 Raster Engraving Memory

Post by BanksCNC »

I've formatted memory many times..it seems so random..attached os one it almost always crashes multiple times on especially when i cut a 8" + tall one.a 14" tall one is guaranteed to crash my machine

Brandon
Attachments
SPECIAL FORCES CREST.zip
(237.7 KiB) Downloaded 81 times
Post Reply

Return to “DSP T9”

Who is online

Users browsing this forum: No registered users and 6 guests