Steeper current adjustment?
-
- Posts: 2
- Joined: Tue Jun 23, 2009 7:42 pm
- Contact:
Steeper current adjustment?
I just received the 3 axis stepper driver and it appears there is no current adjustment for the steppers. Does it have the ability to adjust current on the board?
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Steeper current adjustment?
Formula: Vref/5Rsrealtracks wrote:I just received the 3 axis stepper driver and it appears there is no current adjustment for the steppers. Does it have the ability to adjust current on the board?
Vrf = Voltage at pin#10
Rs= the current resistor (the bigger one you seem on the board, usually 2Watt)
Example:
1.0ohm = 1A
0.39ohm = 1.25A
0.3ohm = 1.5A
-
- Posts: 2
- Joined: Tue Jun 23, 2009 7:42 pm
- Contact:
Re: Steeper current adjustment?
O.K. I expected it to be adjustable with a pot and vref like the rest of my drivers. My fault for not confirming before purchase. I did not expect to have to modify the board to adjust the stepper current.
Thanks for the reply
Miles
Thanks for the reply
Miles
Who is online
Users browsing this forum: No registered users and 77 guests