Network Port forwarding for AWC-608C
Posted: Mon Oct 15, 2018 4:38 am
So I have had this controller for quite sometime, however because of it's location and lack of WiFi, I had not connected it. We now have wired ethernet network connectivity to it, however it is on a different subnet than where CAD/CAM workstations are (aka LaserCAD). To do a L2 VLAN to put them on the same subnet would be difficult, however it would be easier to do port-forwarding from the router to the AWC-608C. To do this, we need to understand what ports and network communication the AWC-608C uses in order to do this. Any help would be appreciated.
Regards,
Drew
Regards,
Drew