Text engraving problem

Post Reply
ichliebekohlmeisen
Posts: 7
Joined: Sat Sep 23, 2017 9:19 pm
Contact:

Text engraving problem

Post by ichliebekohlmeisen »

I setup a new file to engrave some text. In the past it would scan an entire line like an inkjet printer, now it is engraving one complete letter at a time. File was .svg created in Inkscape. I converted all my objects (text) to paths, and opened the file in Raycam. Set my text color and selected engrave. Did I change a setting accidentally?
Techgraphix
Posts: 492
Joined: Fri Jan 20, 2012 1:39 pm
Location: Appelscha, the Netherlands
Contact:

Re: Text engraving problem

Post by Techgraphix »

It's a setting somewhere, i changed it somewhere in the past, but i can't remember exactly what it was... something like BMP-optimize.
But i can't reproduce it anymore else i could tell you.
You have to search in that direction anyway..

Kees
ichliebekohlmeisen
Posts: 7
Joined: Sat Sep 23, 2017 9:19 pm
Contact:

Re: Text engraving problem

Post by ichliebekohlmeisen »

I’ve run it with bmp optimize on and off, no difference.
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: Text engraving problem

Post by Tech_Marco »

Check or unchecked the "Auto Group" should take care your issue

Marco
AutoGroupEngrave.JPG
AutoGroupEngrave.JPG (35.12 KiB) Viewed 3086 times
Post Reply

Return to “DSP X7”

Who is online

Users browsing this forum: No registered users and 8 guests