Vertical grid lines disappear in LaserCad, help!
Posted: Thu Apr 21, 2016 1:32 pm
Vertical grid lines disappear when zooming in a few steps in LaserCad V7.78.1
Grid size is set to 25.4 appears normal when zoomed out. No vertical lines at 3X zoom and above.
With grid size setting of 1mm there is no vertical grid at all. With setting of 10mm there is a normal grid from at 2x and 3x zoom only. At 4X vertical goes away. At 50mm there is normal grid at 0x, 1x and 2x. No vertical lines at 3X.
I have had this problem with other versions of LaserCad as well. Any ideas?
Thank you for looking.
Grid size is set to 25.4 appears normal when zoomed out. No vertical lines at 3X zoom and above.
With grid size setting of 1mm there is no vertical grid at all. With setting of 10mm there is a normal grid from at 2x and 3x zoom only. At 4X vertical goes away. At 50mm there is normal grid at 0x, 1x and 2x. No vertical lines at 3X.
I have had this problem with other versions of LaserCad as well. Any ideas?
Thank you for looking.