X Axis scaling issue & won't recalibrate

Post Reply
BazzaM
Posts: 5
Joined: Thu Oct 29, 2015 1:23 pm
Contact:

X Axis scaling issue & won't recalibrate

Post by BazzaM »

ive got a scaling issue the object is drawn and should be 98mm long but coming out at 99.45mm?
Everything was fine....not changed anything that I know of. Can't seem to recalibrate either? Have installed a PWM power supply since last did this object, that's all......any ideas please?

Barry
SWMS
Posts: 158
Joined: Mon Jan 06, 2014 4:28 am
Contact:

Re: X Axis scaling issue & won't recalibrate

Post by SWMS »

Some of your belts might have stretched a little or something is a little loose, make sure everything is tight enough. Check your steppers to see if they have flats on the axis, if not look up how to put them on with a file.

Draw a 20mm x 20mm box and measure the difference

Go to options > system settings > manufacturer parameters>um/pulse and click on the ... use the calculator to change the um/pulse

This should sort it.
Post Reply

Return to “DSP X7”

Who is online

Users browsing this forum: No registered users and 16 guests