Hi,
Howto set the Time and Date on the Controller?
Regards
voguecocktail
Set Time and Date on AWC708C Plus
-
- Posts: 2
- Joined: Mon Oct 19, 2015 5:10 am
- Contact:
-
- Posts: 492
- Joined: Fri Jan 20, 2012 1:39 pm
- Location: Appelscha, the Netherlands
- Contact:
Re: Set Time and Date on AWC708C Plus
You need a program AWCTOOL V1.3 This is password-protected ( but the password is 608111)
This program wil synchronize the AWC708C Clock with the Computer.
Kees
This program wil synchronize the AWC708C Clock with the Computer.
Kees
-
- Posts: 2
- Joined: Mon Oct 19, 2015 5:10 am
- Contact:
-
- Posts: 41
- Joined: Tue May 19, 2015 4:39 am
- Contact:
Re: Set Time and Date on AWC708C Plus
Thanks Techgraphix, I wanted to point out incase someone didn't know that you need to be hooked up USB to the DSP. I run my programs over Ethernet and realized that when I got a comm error I needed to do USB....Saw the usb.dll file.
Thanks for the program, the date time had been bugging me.
Russell
Thanks for the program, the date time had been bugging me.
Russell
-
- Posts: 41
- Joined: Tue May 19, 2015 4:39 am
- Contact:
Re: Set Time and Date on AWC708C Plus
Techgraphix,
Had a question about the date time program, I run the program and it changes it on the DSP correctly but when I power off the machine and then power it back on it resets to what it was before. Any ideas?
Thanks!
Had a question about the date time program, I run the program and it changes it on the DSP correctly but when I power off the machine and then power it back on it resets to what it was before. Any ideas?
Thanks!
Who is online
Users browsing this forum: No registered users and 29 guests