LO Pro530 user paramenters

Post Reply
Carlosbarraza
Posts: 2
Joined: Sun Jan 29, 2017 9:43 pm
Contact:

LO Pro530 user paramenters

Post by Carlosbarraza »

hey marco

I have a pr 530 and e5 controller and was wondering if i could get a copy of the user and manufacturer parameters. I was wanting to use the as a reference point for adjustments.

thanks carlos
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: LO Pro530 user paramenters

Post by Tech_Marco »

Hey Carol

Parameters foe th PR530 is preset into.the card. Unless you changed it, you can use the software to export.the Parameters for backup

Marco
Carlosbarraza
Posts: 2
Joined: Sun Jan 29, 2017 9:43 pm
Contact:

Re: LO Pro530 user paramenters

Post by Carlosbarraza »

I do have a copy backed up from the e5 but as I purchased the 530 gantry first and built my machine then bought the e5 later. I was wondering if the e5 I purchased is still set for the pr530 gantry. I had to change the range and um/pulse so this is why I was thinking it was not set up to the pr530 gantry and why I was requesting the settings

thanks
carlos
yurirage
Posts: 13
Joined: Wed Sep 19, 2018 7:25 am
Contact:

Re: LO Pro530 user paramenters

Post by yurirage »

The answer to this question would actually be very helpful to anyone who purchased a PR530 X-Y stage. Through a bit of trial and error, I've got a workable set of parameters, but I'm curious to know the factory settings for the turnkey machine.
Post Reply

Return to “LO PR530 Desktop laser machine”

Who is online

Users browsing this forum: No registered users and 3 guests