LaserCad not communicating
-
- Posts: 32
- Joined: Tue Mar 15, 2016 9:45 pm
- Contact:
LaserCad not communicating
Cannot communicate with Laser using LASERCAD, get communication error? Fix or resolution?
-
- Posts: 492
- Joined: Fri Jan 20, 2012 1:39 pm
- Location: Appelscha, the Netherlands
- Contact:
Re: LaserCad not communicating
Is your controller new? can it be that you need to use RayCam instead?
How is your controller connected to your computer? Ethernet or USB..
Kees
How is your controller connected to your computer? Ethernet or USB..
Kees
-
- Posts: 32
- Joined: Tue Mar 15, 2016 9:45 pm
- Contact:
-
- Posts: 32
- Joined: Tue Mar 15, 2016 9:45 pm
- Contact:
Re: LaserCad not communicating
Purchased in the last 18 months
-
- Posts: 32
- Joined: Tue Mar 15, 2016 9:45 pm
- Contact:
Re: LaserCad not communicating
I bought the Upgrade Kit in Feb 2016, Need RayCam?
-
- Posts: 32
- Joined: Tue Mar 15, 2016 9:45 pm
- Contact:
Re: LaserCad not communicating
USB, purchased in Feb 2016>
-
- Posts: 4649
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: LaserCad not communicating
You can check the system info by using the LCD control. Click menu and scroll down to the last option. If see there is "LO" on hardware version,then you must run it with RayCam. Otherwise LaserCad
Make sure you have two cable connection from the LCD control unit to the interface box;CN1 and CN1. If you got one cable connected, the system won't function properly
Marco
Make sure you have two cable connection from the LCD control unit to the interface box;CN1 and CN1. If you got one cable connected, the system won't function properly
Marco
-
- Posts: 32
- Joined: Tue Mar 15, 2016 9:45 pm
- Contact:
Re: LaserCad not communicating
Thanks I will check!
-
- Posts: 32
- Joined: Tue Mar 15, 2016 9:45 pm
- Contact:
Re: LaserCad not communicating
Marco,
I have been unable to get LaserCad to communicate.
Can you provide me the link to RayCam.
Thanks,
Jerry
I have been unable to get LaserCad to communicate.
Can you provide me the link to RayCam.
Thanks,
Jerry
-
- Posts: 492
- Joined: Fri Jan 20, 2012 1:39 pm
- Location: Appelscha, the Netherlands
- Contact:
Re: LaserCad not communicating
Did you check the hardware version? And was it "LO xxx.." ?
If not, you have another problem..
To which USB-connector did you connect the computer? the one on top, or de one at the underside of the display-unit?
Wouldn't you try to connect it with the Ethernet of your computer? This connection is more stable and i think it's much faster too..
(configure your controller in the same range of your computer: ie. if your computer is 192.168.178.xx, make your controller 192,168.178.yy)
Kees
If not, you have another problem..
To which USB-connector did you connect the computer? the one on top, or de one at the underside of the display-unit?
Wouldn't you try to connect it with the Ethernet of your computer? This connection is more stable and i think it's much faster too..
(configure your controller in the same range of your computer: ie. if your computer is 192.168.178.xx, make your controller 192,168.178.yy)
Kees
Who is online
Users browsing this forum: No registered users and 7 guests