power z table limit mount (3d printed)

pw98
Posts: 11
Joined: Sun Oct 02, 2016 5:53 pm

power z table limit mount (3d printed)

Postby pw98 » Tue Oct 04, 2016 7:51 pm

Converted the one on the forum to an STL that I could print
http://www.thingiverse.com/thing:1808025/#files

You'll need to drill out the limit switches with a 3mm drill bit. These are the switches that I used:
https://www.amazon.com/gp/product/B00E0 ... UTF8&psc=1
Last edited by pw98 on Wed Oct 05, 2016 2:30 pm, edited 1 time in total.

bonnette_l@yahoo.com
Posts: 30
Joined: Sun Oct 12, 2014 9:37 am

Re: power z table limit mount (3d printed)

Postby bonnette_l@yahoo.com » Wed Oct 05, 2016 10:30 am

Thank you very much pw
I intend to use this

Larry

pw98
Posts: 11
Joined: Sun Oct 02, 2016 5:53 pm

Re: power z table limit mount (3d printed)

Postby pw98 » Wed Oct 05, 2016 2:09 pm

I'll upload a different model with smaller holes for those that do not intend on using heat-set inserts


Return to “D40/K40 small chinese CO2 laser machine”

Who is online

Users browsing this forum: No registered users and 8 guests