power z table limit mount (3d printed)

Post Reply
pw98
Posts: 11
Joined: Sun Oct 02, 2016 5:53 pm
Contact:

power z table limit mount (3d printed)

Post by pw98 »

Converted the one on the forum to an STL that I could print
http://www.thingiverse.com/thing:1808025/#files

You'll need to drill out the limit switches with a 3mm drill bit. These are the switches that I used:
https://www.amazon.com/gp/product/B00E0 ... UTF8&psc=1
Last edited by pw98 on Wed Oct 05, 2016 2:30 pm, edited 1 time in total.
[email protected]
Posts: 30
Joined: Sun Oct 12, 2014 9:37 am
Contact:

Re: power z table limit mount (3d printed)

Post by [email protected] »

Thank you very much pw
I intend to use this

Larry
pw98
Posts: 11
Joined: Sun Oct 02, 2016 5:53 pm
Contact:

Re: power z table limit mount (3d printed)

Post by pw98 »

I'll upload a different model with smaller holes for those that do not intend on using heat-set inserts
Post Reply

Return to “D40/K40 small chinese CO2 laser machine”

Who is online

Users browsing this forum: No registered users and 21 guests