connecting 40w co2 laser tube?

[Fabricio_pereira]

Hello forum friends ... 1 year'm following the topics of this forum, I found very information rich.
Well now is the time I have a K40 and now I will do the conversion it soon
I would like to help someone ... how do I test the laser tube
I already have the hoses, tubing, fountain, water bucket.
if someone help me I am grateful
att
Fabricio
(Brazil)

[Things]

Do you have the power supply for it? You will need one to power it up.

[waltfl]

Hi there
if you fill the tube with cooling water ( distilled water only) make sure that there are not air bubbles inside the tube or you destroy the tube.
I not clear if you got aK40 what do you wana do??? there is already all build in.
greetings
waltfl

Hello forum friends ... 1 year'm following the topics of this forum, I found very information rich.
Well now is the time I have a K40 and now I will do the conversion it soon
I would like to help someone ... how do I test the laser tube
I already have the hoses, tubing, fountain, water bucket.
if someone help me I am grateful
att
Fabricio
(Brazil)

[Fabricio_pereira]

Hi .. thanks for the feedback ...
THINGS...Yes I have power supply (I'll attach some photos below.)
if you can tell me I am grateful
WALTFL On the water ... I tested using ordinary water, but the water which would be the best?
- Distilled water for laboratory
- Deionized water
...I noticed when I received my tube that was broken part of the piece where the mirror cools did a repair. (I'll attach some photos below.)
... and also will buy new electronics for lightobject ... DSP Kit
if friends can help me I appreciate.
(sorry my ingles is by google translator, it is viable only means of communication.)

[Fabricio_pereira]

....I did more drawings to better understand ... correct me if I'm wrong.
thank you...

[Tech_Marco]

Download the laser power connection diagram from this location: download/file.php?id=32
You need to get a 5K or 10K potentiometer (VR) for power adjustment if you're not using DSP.

Marco

[Fabricio_pereira]

MARCO!
this piece is the K40 ... 40w laser tube is with these pieces I can do the installation?
and also I did not understand the means of connecting the power supply ... I will attach another picture.
if we speak
big hug!

[Fabricio_pereira]

please...

[Tech_Marco]

Did you see the link I sent you from my last reply?
That show you the connection of connrcting a power supply. You don't understand it?

Marco

[Fabricio_pereira]

yeah I looked at the link but I did not, because I'm not techno for translate. But it would be better for me to see some photos better.
ah ... I sent an email to you and not returned on Kit DSP.
Thanks for everything!

[Tech_Marco]

Send email about your question for the DSP kit please as I couldn't locate it in my mail boxes. Too many mails coming daily so sometimes I may over-sighted it.

Marco