water pump control

Post Reply
soviatt
Posts: 1
Joined: Wed Jul 22, 2015 10:50 am
Contact:

water pump control

Post by soviatt »

I want to setup a variable speed pump for testing that I can control using a 0-10v dc signal (from a PLC) . I am limited with the current from the control signal to 175mA. I want to be able to pump about 1gpm and vary the speed of the pump using the 0-10v dc control signal. I have the PLC, and both a 12v and 24dc power supplies. What would you recommend to as far as a pump, and a driver to power/control the pump.
Thanks
Techgraphix
Posts: 492
Joined: Fri Jan 20, 2012 1:39 pm
Location: Appelscha, the Netherlands
Contact:

Re: water pump control

Post by Techgraphix »

first: what kind of motor you want to controll?? AC/DC 24V or 230V~ ? Power??
A small electronic circuit can be simple solution..
Kees
Post Reply

Return to “Others”

Who is online

Users browsing this forum: No registered users and 4 guests