sudden loss of power

mcopeland
Posts: 1
Joined: Tue May 19, 2015 2:05 pm

sudden loss of power

Postby mcopeland » Tue May 19, 2015 2:09 pm

I have a machine that I cut a sheet on this morning, and it cut fine. I then changed out the lense and now it wont cut.

it is in focus.
the mirrors are aligned.

the beam seems weak.
it is showing 28mA draw on the meter.

normally if I stick a piece of material in line with the beam and the first mirror it will instantly burn it. now I have to hold the laser button to even get it to darken.

any help would be appreciated.

Tech_Marco
Posts: 4084
Joined: Mon Jun 15, 2009 2:00 pm

Re: sudden loss of power

Postby Tech_Marco » Tue May 19, 2015 8:04 pm

The tube seems dying. Time to get a new tube

BTW, you may want to post laser related topics on the "CO2 laser" area


Regards,
Marco

NickWL
Posts: 252
Joined: Mon Apr 07, 2014 1:23 am

Re: sudden loss of power

Postby NickWL » Mon May 25, 2015 3:48 am

Put the old lens back in and see if thatchers the problem. If it does then your new lens is no good.
Nick :roll:


Return to “CNC zone”

Who is online

Users browsing this forum: No registered users and 1 guest