Page 1 of 1
Wiring diagram needed for NEMA 17 42HS02 Stepper motor
Posted: Sun Apr 07, 2013 12:48 pm
by Anthrobones
I recently purchased the NEMA 17 42HS02 Stepper motor, and I need the breakout for the wiring. Not depicted on the website, please post.
Re: Wiring diagram needed for NEMA 17 42HS02 Stepper motor
Posted: Sun Apr 07, 2013 3:37 pm
by Tech_Marco
1 & 4
and
3 & 6
If you connect 1 & 4 together (shorted circuit), you will find some resistance when you twist the axial. If you free no difference (freely move), then 1 & 4 is not in pair, so does 3&6. It is the basic testing method to find out the stepping motor pairing
Marco
Re: Wiring diagram needed for NEMA 17 42HS02 Stepper motor
Posted: Thu Apr 18, 2013 4:56 pm
by Anthrobones
So your telling me to hook it up, POWER IT, and feel for resistance? You cannot simply tell me the pin-out for a product you sell?? Are you going to replace it when I blow the motors?
Tech_Marco wrote:1 & 4
and
3 & 6
If you connect 1 & 4 together (shorted circuit), you will find some resistance when you twist the axial. If you free no difference (freely move), then 1 & 4 is not in pair, so does 3&6. It is the basic testing method to find out the stepping motor pairing
Marco
Re: Wiring diagram needed for NEMA 17 42HS02 Stepper motor
Posted: Sat Apr 20, 2013 8:02 am
by Stephen6309
Spinning a stepper motor by hand won't generate much current to damage the motor. You can also use a multimeter to see which pairs are connected.
Re: Wiring diagram needed for NEMA 17 42HS02 Stepper motor
Posted: Sun Apr 21, 2013 9:55 pm
by Tech_Marco
Anthrobones wrote:So your telling me to hook it up, POWER IT, and feel for resistance? You cannot simply tell me the pin-out for a product you sell?? Are you going to replace it when I blow the motors?
I already told you that it is 1,4 and 3,6 . I just wanted to tell you more how to test a stepping motor without knowing the cable. If you can't do it, no problem just send it back for refund.
Marco