3-1/2 Digital Blue LCD DC 2V 20V Meter (8035) NOT WORKING

Post Reply
erich font
Posts: 2
Joined: Tue Oct 02, 2012 1:08 pm
Contact:

3-1/2 Digital Blue LCD DC 2V 20V Meter (8035) NOT WORKING

Post by erich font »

EPM-8035B20V

3-1/2 Digital Blue LCD DC 2V 20V Meter (8035) JUST GOT THIS AND HOOKED UP TO 4 "C BATTERYS" AND NOTHING CAME ON THEN TO A 12 VOLT BATTERY AND NOTHING WHATS UP
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: 3-1/2 Digital Blue LCD DC 2V 20V Meter (8035) NOT WORKIN

Post by Tech_Marco »

When you hook up the battery power to the meter (red, black), was the LCD light up or not?
If not, it could be defective.

Marco
erich font
Posts: 2
Joined: Tue Oct 02, 2012 1:08 pm
Contact:

Re: 3-1/2 Digital Blue LCD DC 2V 20V Meter (8035) NOT WORKIN

Post by erich font »

NO THE LIGHT NEVER CAME ON, BUT I CALLED AND GETTING A REPLACEMENT,

P.S. IN THE ENLARGED PICTURE OF THE PRODUCT YOU CAN RIGHT CLICK ON THE PICTURE AND SAVE PICTURE IN ORDER TO LOOK AT THE WIRING PLACES

ALSO THE GREEN WIRE GOES TO POSITIVE
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: 3-1/2 Digital Blue LCD DC 2V 20V Meter (8035) NOT WORKIN

Post by Tech_Marco »

Red = + power
Black = Gnd

Green & Blue: Voltage input
The meter is common ground so the input ground is the same as the power ground (black)
Usually the wire next to the black is the ground also. You don't need the ground input if you measure it's own voltage
Post Reply

Return to “Others”

Who is online

Users browsing this forum: No registered users and 4 guests