I just picked up a 2 CH 1527 TX/RX set and an extra TX. I built a quick jig and had no problems at all- learning the remotes was quick and easy, and I could control both channels as expected.
Then I built up the circuit I am going to be using. For my application, I need two momentary normally open contacts, but I want to prevent both from being closed simultaneously. This is an easy issue to resolve- I simply fed the CH2's common from CH1's NC contact. This way CH1 is inactive, CH2 can be activated- but anytime CH1 is activated, it disconnects CH2's feed.
But when I went to test it, it didn't work- only CH1 had an output.
A quick check with a meter revealed the answer- the documented pinout for the relays is wrong. For each of the relays, the terminals are labeled A, B, and C. The legend indicates that A is normally closed, B is normally open, and C is common. This is incorrect- B and C are inverted and the correct legend should be;
A = Normally Closed
B = Common
C= Normally Open
Note that if you are only using the normally open contact, it doesn't matter- this only is an issue if you attempt to use the normally closed contact. i suspect that this has not been an issue for most people since the majority of applications use only normally open contacts.
Using this corrected pinout, I was able to rewire up circuit and it works exactly as expected.
2 CH 1527 - relay pinout incorrect
-
- Posts: 1
- Joined: Tue Jun 03, 2014 4:26 pm
- Contact:
Return to “RF Wireless Controller”
Jump to
- Please login to view more content
- Special note
- Administrative Category
- ↳ New Product on the board
- ↳ Latest News
- Sell & Wanted
- ↳ Laser products
- ↳ CNC products
- ↳ Electronics products
- ↳ Others
- Repair * Upgrade * Product evaluation logs
- ↳ Repair & Upgrade
- ↳ Product Lab
- ↳ Cutting & Engraving tips
- Discussion Board for our products
- ↳ FAQ (laser)
- ↳ Tips and new on the DSP & Software
- ↳ DSP Controller for CO2 laser
- ↳ AWC7824
- ↳ AWC7813
- ↳ Ruida R6445G/X
- ↳ DSP T9
- ↳ DSP X7
- ↳ DSP R5
- ↳ DSP E5
- ↳ DSP 608
- ↳ CO2 Laser Discussion
- ↳ News
- ↳ LO PR530 Desktop laser machine
- ↳ Auto focus laser head
- ↳ D40/K40 small chinese CO2 laser machine
- ↳ Introduction
- ↳ Metal Cutting/Engraving laser machine
- ↳ Artwork from DIY'er (share your art design)
- ↳ CNC zone
- ↳ Temperature Controller
- ↳ Electronics
- ↳ RF Wireless Controller
- ↳ Digital/ Analog Meter
- ↳ Laser & CNC products
- ↳ DSP controller
- ↳ Water Chiller
- ↳ Laser power supply
- ↳ XY gantry and frame
- ↳ Motor driver
- ↳ K40 small laser
- ↳ Temperature Controller
- ↳ Digital Volt Current Meters
- ↳ RF Wireless Controller
- ↳ LCD Module
- ↳ Digital AC/DC Power (Watt) Meter
- ↳ AC Power Frequency Meter
- ↳ Other electronics devices
- ↳ Water pump
- ↳ LED
- Software Download
- ↳ DSP Laser Controller
- ↳ Fiber Laser
- Other Topics (you can make a request to to add a new topic)
- ↳ Flying
- ↳ Take a cup of coffee & relax
- ↳ Others
Who is online
Users browsing this forum: Bing [Bot] and 1 guest