JLD634 showing EEEE
Posted: Fri Mar 14, 2014 8:57 am
I need help in troubleshooting a new JLD634.
I am using a K type thermocouple, I set the input to K type. Set low to 0 and high to 1300 degrees C. 0 decimal point.
I made sure connections are tight and clean, and checked polarity.
Any ideas?
I am using a K type thermocouple, I set the input to K type. Set low to 0 and high to 1300 degrees C. 0 decimal point.
I made sure connections are tight and clean, and checked polarity.
Any ideas?