Lightobject.com Support Forum

I have the jld634 with a pt 100 thermocoupler. Does anyone know how to wire it? It is not registering a temp. Just reads EEEE.
I also need to know how the wiring should be to and from the SSR?
Appreciate any help I can get. Thank you!

The manual should give you what you need, but a look at the JLD612 manual wiring diagrams might be very helpful. You can download the manuals from the lightobject site.

Have you figured out what you need? I have three of these running, so let me know if you have any more questions.