JLD 612 Temp Failsafe

Post Reply
ReWind
Posts: 1
Joined: Mon Sep 02, 2013 10:12 am
Contact:

JLD 612 Temp Failsafe

Post by ReWind »

I want to add a failsafe to my oven, to prevent an over temperature situation.

If I add another SSR with the power side in series with the one controlling the heating element, and the control side connected to terminals 3 & 4 with AL1 set to a maximum temperature, will this accomplish my goal?

Thank you for your help.
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: JLD 612 Temp Failsafe

Post by Tech_Marco »

Yes, that is a good way to do 'double lock' for safety protection. However, you can't use the built in relay to handle the high current from the load. Instead, you should use the J1 (#4,#5) to power (need to feed power) an external relay with higher current capability to do the job. In other words, use #4,#5 as a "switch" to power up another relay (bigger) and shut off power for the load

Marco
Post Reply

Return to “Temperature Controller”

Who is online

Users browsing this forum: No registered users and 7 guests