JLD612TC temp keeps climbing.

Post Reply
drandolph
Posts: 33
Joined: Tue May 18, 2010 11:40 pm
Contact:

JLD612TC temp keeps climbing.

Post by drandolph »

So here's my problem.

I have this pad with a built in 100k thermistor
http://store.qu-bd.com/product.php?id_product=30

When I try P10.0 or p100 I get EEE.E but when I set it to J mode (even though its for a thermocouple) I get a reading but at room temperature it keeps climbing higher and high. I know I'm wrong but how am I wrong and whats the best way to fix this?


Basically I'm just trying to heat the pad to a temp and hold it there.
richiem
Posts: 270
Joined: Mon Jan 03, 2011 3:47 pm
Contact:

Re: JLD612TC temp keeps climbing.

Post by richiem »

The controller won't work with a thermistor -- it isn't programmed for that type of sensor. I recommend that you use a Pt100 probe or K type thermocouple.
Post Reply

Return to “Temperature Controller”

Who is online

Users browsing this forum: No registered users and 9 guests