Multiple lasers on one water reservoir and chiller?

TimAustinTX
Posts: 30
Joined: Wed Dec 04, 2013 5:29 pm

Multiple lasers on one water reservoir and chiller?

Postby TimAustinTX » Sat Apr 15, 2017 6:49 pm

I have 4 (60W) laser machines I was thinking about running out of one large water reservoir and using a single large chiller (Lightobject 1600W Water Chiller).

Is there a reason that I should not do this?

Thank you,
Tim

SWMS
Posts: 124
Joined: Mon Jan 06, 2014 4:28 am

Re: Multiple lasers on one water reservoir and chiller?

Postby SWMS » Sun Apr 16, 2017 1:59 am

It will work in some form but if they are all running all day you might find the chiller will struggle. I wouldn't run them in series though. I'd try and do it in parallel.

Tech_Marco
Posts: 4192
Joined: Mon Jun 15, 2009 3:00 pm

Re: Multiple lasers on one water reservoir and chiller?

Postby Tech_Marco » Sun Apr 16, 2017 9:19 am

You need to use 4x pumps to handle four lasers. Do NOT put those tubes in series or.... :!:

The LO1600W water chiller can handle two 150W tubes or 4x 100Ws working simultaneously. For that case, a separated pump is installed to handle each tube individually. A dual pump LO1600W is only available per request. We usually don't stock them

In your case, I'll have a 3 gallon reservoir acting as a 'buffer' tank and have four water pumps hooked up to the tanks. The chiller is cooling off the 3 gallons water instead of driving 4 tubes direct that connecting in series mode.


Marco

TimAustinTX
Posts: 30
Joined: Wed Dec 04, 2013 5:29 pm

Re: Multiple lasers on one water reservoir and chiller?

Postby TimAustinTX » Sun Apr 16, 2017 7:40 pm

The idea was to run a pump for each machine and a separate pump for the chiller just to circulate the water from the tank.

TimAustinTX
Posts: 30
Joined: Wed Dec 04, 2013 5:29 pm

Re: Multiple lasers on one water reservoir and chiller?

Postby TimAustinTX » Sun Apr 16, 2017 7:58 pm

You may get a better idea of what I was talking about with the drawing.
Image

http://imgur.com/a/5rfWh

SWMS
Posts: 124
Joined: Mon Jan 06, 2014 4:28 am

Re: Multiple lasers on one water reservoir and chiller?

Postby SWMS » Mon Apr 17, 2017 2:23 am

On a similar note. What are people using as an anti mould growth solution.

I've had issues with this, initially I thought it was algae. But after trying anti algae drops I found it wasn't algae but mould.

Options seem to be hydrogen peroxide, Milton or a few drops of iodine. Put a sterilising tablet in the buffer tank and wash it out before filling it with coolant. I'd also put a fine filter on the pump.


Return to “Temperature Controller”

Who is online

Users browsing this forum: No registered users and 1 guest