Lightobject.com Support Forum

Posted: **Thu Feb 25, 2021 8:58 am**

Im at a wall on getting my machine running again after the Switching PS went out.. Ive replaced the SPS, the LPS, the DSP and the tube... I get a good beam when I test fire from the LPS , but when I run a program ,Im only getting about 5ma on the meter when its set to fire at 75% ..
this is a 100W laser using the T9 DSP

Posted: **Thu Feb 25, 2021 12:32 pm**

Please check PWM connection. t9 controller's LPWM is 5V. Need to use the PWM output.

Lightobject.com Support Forum

Laser test fire works , DSP fire doesnt

Laser test fire works , DSP fire doesnt

Re: Laser test fire works , DSP fire doesnt