Wiring 6 wire 3-phase stepper to 3 phase driver

Post Reply
Winstonc
Posts: 26
Joined: Sat Feb 18, 2017 10:54 am
Contact:

Wiring 6 wire 3-phase stepper to 3 phase driver

Post by Winstonc »

I have a NEMA 23 3 phase 573S15 5.2A 212in-oz Stepper motor http://www.lightobject.com/NEMA-23-3-ph ... -P888.aspx and a NEMA 23 3 phase 573S09 3.5A 127in-oz Stepper motor http://www.lightobject.com/-NEMA-23-3-p ... -P914.aspx that I need to wire to two 3MD560 Leadshine Compatible 3 Phase 8.4A 1-axis Stepping Motor Driver http://www.lightobject.com/3MD560-Leads ... -P836.aspx.

I know they connect to the U,V and W terminals on the drivers and I assume that as the steppers have wires that I connect pairs of them together to then run 3 wires to the drivers, but I am unsure as to what the color pairs are and also what color goes to which terminal on the drivers.

If I could get some guidance, I would be very graterful.

Thanks

David
Post Reply

Return to “CO2 Laser Discussion”

Who is online

Users browsing this forum: No registered users and 4 guests