Laser tube NO PULSE

Post Reply
Marika
Posts: 2
Joined: Thu May 19, 2016 10:28 am
Contact:

Laser tube NO PULSE

Post by Marika »

I have a Blue &White 50w chinese laser. It is less than 3 months old and the laser tube completely quit firing in the middle of a job. Everything else is functioning properly. I followed directions I recieved on the group I belong to. THe test button got no pulse. I pulled all the plugs and let it sit. I checked water flow and temp. The Laser power supply fanis working and I have a green light.
The seller has stopped communicating with me after I sent videos and photos as requested and now I have opened a dispute, but in the mean time I still don't know what the problem is. I would go ahead and replace the faulty part if only I knew what part was malfunctioning. Can anyone help? I had a k40 before that I replaced the tube with a lightobject tube so I am fairly handy. The tube shows no sign of damage.
Post Reply

Return to “CO2 Laser Discussion”

Who is online

Users browsing this forum: No registered users and 17 guests