Embedded CNC Control System. 3 times faster than Mach3
Posted: Mon Apr 19, 2010 7:16 am
This embedded system was developed on the Linux platform. Software was developed by one of our software engineer who do helicopter control system design. The hardware was developed by a flying control testing engineer. The system is capable to convert a 'gray color' picture into a G-code and create NC file itself. The LCD can pre-view the image and will show progress of engraving/cutting.
The system was contained in a small box that make it handy. The input is an USB and the output is a DB25 to a 3 axis controller or to a 'add-on' board. In addition we're working on a industry control panel pad that support most command just by one 'Press'.
Speed of this system is about 3 times faster than Mach3. Prototype product is completed. Currently, we're on a case for the first version and it should be launched in about 1~1.5 months.
http://www.youtube.com/watch?v=MfrCWgazJiA
The system was contained in a small box that make it handy. The input is an USB and the output is a DB25 to a 3 axis controller or to a 'add-on' board. In addition we're working on a industry control panel pad that support most command just by one 'Press'.
Speed of this system is about 3 times faster than Mach3. Prototype product is completed. Currently, we're on a case for the first version and it should be launched in about 1~1.5 months.
http://www.youtube.com/watch?v=MfrCWgazJiA