1212S DC-DC 12V (1watt) isolated power module pin schematic
-
- Posts: 3
- Joined: Fri Dec 17, 2010 6:55 am
- Contact:
1212S DC-DC 12V (1watt) isolated power module pin schematic
I ordered SKU EPS-1212W1 but I can not find a pin schematic anywhere. I found similar items but I hate to just wing it. Could you help me out by directing me to a schematic for the pins on this IPM? Thanks.
-
- Posts: 3
- Joined: Fri Dec 17, 2010 6:55 am
- Contact:
Re: 1212S DC-DC 12V (1watt) isolated power module pin schema
Oops I missed the reference to model 1212 in the other thread I looked at .
I found the information I was looking for here:
viewtopic.php?f=12&t=171
but I do have one more question. Is left to right, when determining pin number 1, always with text up on the IPM? Thanks. I just don't want to accidentally invert pin 1 and pin 8.
I found the information I was looking for here:
viewtopic.php?f=12&t=171
but I do have one more question. Is left to right, when determining pin number 1, always with text up on the IPM? Thanks. I just don't want to accidentally invert pin 1 and pin 8.
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: 1212S DC-DC 12V (1watt) isolated power module pin schema
If you look at the picture carefully, you see the number is from left to right.
-
- Posts: 3
- Joined: Fri Dec 17, 2010 6:55 am
- Contact:
Re: 1212S DC-DC 12V (1watt) isolated power module pin schema
Marco, Thanks for the reply. I see the number scheme on the picture my question is how to determine what side is the left and what side is the right. ie Should the printed side always be up when determining left to right? Thanks again.
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Who is online
Users browsing this forum: No registered users and 95 guests