New 4 axis stepper controller (TB6560-4V5 Blue Board)

Post Reply
GiriPod
Posts: 5
Joined: Fri Aug 17, 2012 8:11 pm
Contact:

New 4 axis stepper controller (TB6560-4V5 Blue Board)

Post by GiriPod »

Can I get updated documentation for the TB6560 4 axis controller as I can't work out the connections on the parallel port side?

The relay connection is obvious, but there is a 6 way screw down block and a 15 DB connector which I assume are the 5th axis and limit switches.

Thanks
Tech_Marco
Posts: 4646
Joined: Mon Jun 15, 2009 3:00 pm
Contact:

Re: New 4 axis stepper controller (TB6560-4V5 Blue Board)

Post by Tech_Marco »

You may used the manual for the red board that I posted on the manual section. It's 99% compatible with the blue board, except that the relay pin was swapped between #14 and #17.

Let me know if you still have a problem to configure it.


Marco
Post Reply

Return to “Electronics”

Who is online

Users browsing this forum: No registered users and 17 guests