Real time tracking auto focus laser head
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Real time tracking auto focus laser head
- Attachments
-
- AutoFocusHead.jpg (98.56 KiB) Viewed 21702 times
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
-
- Posts: 2
- Joined: Mon Jun 05, 2017 2:15 am
- Contact:
Re: Real time tracking auto focus laser head
That is AWESOME! I'm super stoked that you got that one going!
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
I have that idea back to 5~6 years ago. At that time, I couldn't find any digital distance sensor and thinking to design one. I went to talk with an engineer in Parallax, Rosevile in California where is 45min drive from my office. Anyway, long story short. Recently I found the sensor so I teamed up with my buddy Rix who know programming well. So, we split the project in half: hardware and software. I take care the hardware production and he take care the coding. First prototype was terrible because wrong ball screw was using and some design flaw. It cost me a trip back to China and got it fixed. The first version could travel as fast 80mm/s. The revised model can run as fast as 300mm/s.
See a new video I made:
marco
See a new video I made:
marco
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
A couple customer called for the status of their purchase of the RTAF system. I'm sorry that we're a little behind schedule on PCB designed and fabrication. The design is completed and has been sent to prototyping. The controller should be ready in 2~3 weeks.
Marco
Marco
-
- Posts: 67
- Joined: Thu Aug 11, 2011 10:57 am
- Contact:
Re: Real time tracking auto focus laser head
Hi Marco
I’m interested in purchasing one of your new “Real time tracking autofocus laser heads”, for a customer with a very large laser cutting machine, for which leveling of the cutting table would be too hard and expensive, I have a few questions though:
- Does the item in your online store (LSR-RTAF70M) include the stepper motor, stepper driver and power supply?
- Is this head a standalone unit?, does it have its own control independent from the machine’s controller?
- Is it compatible with any type of laser controller? Or is a specific DSP model required?
- Could you please send documentation on how to integrate it to a laser machine?
Thank you in advance for your help
Best regards,
Fernando
I’m interested in purchasing one of your new “Real time tracking autofocus laser heads”, for a customer with a very large laser cutting machine, for which leveling of the cutting table would be too hard and expensive, I have a few questions though:
- Does the item in your online store (LSR-RTAF70M) include the stepper motor, stepper driver and power supply?
- Is this head a standalone unit?, does it have its own control independent from the machine’s controller?
- Is it compatible with any type of laser controller? Or is a specific DSP model required?
- Could you please send documentation on how to integrate it to a laser machine?
Thank you in advance for your help
Best regards,
Fernando
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
Hi Fernando:
Good to hear from you again! Please see my reply below:
- Does the item in your online store (LSR-RTAF70M) include the stepper motor, stepper driver and power supply?
Ans: Motor (Yes), Driver(Yes), power supply (No, you need DC 24V 3A or 5A better)
- Is this head a standalone unit?, does it have its own control independent from the machine’s controller?
Ans: Yes.
- Is it compatible with any type of laser controller? Or is a specific DSP model required?
Ans: Should work for most DSP controller. It need 'LH' (TTL signal to Laser power supply to work)
- Could you please send documentation on how to integrate it to a laser machine?
Ans: Working on it. It is pretty simple for installation and control. The most challenging task is to get it correct mounting plate to hang the laser head. Plus, a modified mounting plate for the 2nd mirror may be required. But we provide laser metal cut to assist you should you provide a drawing.
Marco
Good to hear from you again! Please see my reply below:
- Does the item in your online store (LSR-RTAF70M) include the stepper motor, stepper driver and power supply?
Ans: Motor (Yes), Driver(Yes), power supply (No, you need DC 24V 3A or 5A better)
- Is this head a standalone unit?, does it have its own control independent from the machine’s controller?
Ans: Yes.
- Is it compatible with any type of laser controller? Or is a specific DSP model required?
Ans: Should work for most DSP controller. It need 'LH' (TTL signal to Laser power supply to work)
- Could you please send documentation on how to integrate it to a laser machine?
Ans: Working on it. It is pretty simple for installation and control. The most challenging task is to get it correct mounting plate to hang the laser head. Plus, a modified mounting plate for the 2nd mirror may be required. But we provide laser metal cut to assist you should you provide a drawing.
Marco
-
- Posts: 67
- Joined: Thu Aug 11, 2011 10:57 am
- Contact:
Re: Real time tracking auto focus laser head
Hi Marco,
Great!, I'm working as an advisor for a customer who is building an incredibly large laser cutter (around 20 feet long!), he will be purchasing from you, not me, I think it will work, I'll have him contact you when we're finished selecting the required components.
Great!, I'm working as an advisor for a customer who is building an incredibly large laser cutter (around 20 feet long!), he will be purchasing from you, not me, I think it will work, I'll have him contact you when we're finished selecting the required components.
-
- Posts: 67
- Joined: Thu Aug 11, 2011 10:57 am
- Contact:
Re: Real time tracking auto focus laser head
Hi Marco,Tech_Marco wrote:Hi Fernando:
Good to hear from you again! Please see my reply below:
- Does the item in your online store (LSR-RTAF70M) include the stepper motor, stepper driver and power supply?
Ans: Motor (Yes), Driver(Yes), power supply (No, you need DC 24V 3A or 5A better)
- Is this head a standalone unit?, does it have its own control independent from the machine’s controller?
Ans: Yes.
- Is it compatible with any type of laser controller? Or is a specific DSP model required?
Ans: Should work for most DSP controller. It need 'LH' (TTL signal to Laser power supply to work)
- Could you please send documentation on how to integrate it to a laser machine?
Ans: Working on it. It is pretty simple for installation and control. The most challenging task is to get it correct mounting plate to hang the laser head. Plus, a modified mounting plate for the 2nd mirror may be required. But we provide laser metal cut to assist you should you provide a drawing.
Marco
Please let me know as soon as you have documentation on how to install this new head, I need at least electrical connections instructions as I need to verify what's needed to interface your head's control to the machine's controller
Thank you
Fernando
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
We need to re-work the circuit board on the ATF. We found some glitch with the current board. So, I need to push 2 more months before launching
Marco
![Sad :(](./images/smilies/icon_e_sad.gif)
Marco
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
Update:
This version has 'sinking' issue fixed and bouncing has been minimized by changing sensor location
What is next? Need to make sure no more bouncing appear during cutting. Fine tuning on sensitivity to get optimized speed
Marco
1-24-2019
This version has 'sinking' issue fixed and bouncing has been minimized by changing sensor location
What is next? Need to make sure no more bouncing appear during cutting. Fine tuning on sensitivity to get optimized speed
Marco
1-24-2019
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
Update: Most issues have been taken care. Waiting for new controller board fabricated and need new parts for the laser head.
Marco![Wink ;)](./images/smilies/icon_e_wink.gif)
Marco
![Wink ;)](./images/smilies/icon_e_wink.gif)
-
- Posts: 67
- Joined: Thu Aug 11, 2011 10:57 am
- Contact:
Re: Real time tracking auto focus laser head
Hi Marco,
How is this project going, when do you expect to have it available?
How is this project going, when do you expect to have it available?
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
Logic is OK and it works as expected. We redesigned the controller board but the tech made a mistake so we have to send it to fabricate again. Bummer!
I'm heading tonight and I'll be there by 15th. I'll spend some time with the tech to get it done. Once new board tested and function well, we're ready to ship. Currently, another tech is working on the manual. I'll post it once completed.
Regards,
Marco
I'm heading tonight and I'll be there by 15th. I'll spend some time with the tech to get it done. Once new board tested and function well, we're ready to ship. Currently, another tech is working on the manual. I'll post it once completed.
Regards,
Marco
-
- Posts: 4647
- Joined: Mon Jun 15, 2009 3:00 pm
- Contact:
Re: Real time tracking auto focus laser head
See the difference between the first design and the latest design
Old design: New design:
Marco
Old design: New design:
Marco
Who is online
Users browsing this forum: No registered users and 5 guests