Search found 38 matches

by TheSniper
Sun Jun 24, 2018 6:10 am
Forum: Tips and new on the DSP & Software
Topic: Raycam back to Lasercad Steps.
Replies: 4
Views: 387

Re: Raycam back to Lasercad Steps.

Marco,
Ill call the office Monday,
I was upgraded to Raycam, back last year.
"But desire to be returned back to Lasercad."

Hopefully they can send me the patch.
Thanks & enjoy your trip to China & Japan.
Sam
by TheSniper
Sat Jun 23, 2018 9:36 pm
Forum: Tips and new on the DSP & Software
Topic: Raycam back to Lasercad Steps.
Replies: 4
Views: 387

Re: Raycam back to Lasercad Steps.

Marco,
How do I get my Card back to LaserCad
If Raycam is no longfer supported?
I can ship back to you for flash back to Lasercad support.
Let me know.
-Sam
Thanks for the speedy reply. :)
by TheSniper
Sat Jun 23, 2018 10:53 am
Forum: Tips and new on the DSP & Software
Topic: Raycam back to Lasercad Steps.
Replies: 4
Views: 387

Raycam back to Lasercad Steps.

Marco, Could you provide the steps: 1) X7 LaserCad to Raycam 2) X7 Raycam back to Lasercad 3)Will a RMA or similar number be necessary? 4)Shipping address 5) Fees for any programming 6)where to send payment to. 7)what exactly to send. a)Lcd Panel b)Controller Box or c)both the LCD and Controller box...
by TheSniper
Sat Nov 11, 2017 8:41 am
Forum: Tips and new on the DSP & Software
Topic: Raycam Vs Lasercad
Replies: 1
Views: 538

Raycam Vs Lasercad

Marco, A few things. 1 is it possible: To make it easier for everyone (you included) to have a post describing the diferences between Raycam And LaserCad. or a separate forum with posts indicating the same. Trying to look up What how etc.. is very frustrating. Along with no real documentation. So: p...
by TheSniper
Fri Nov 10, 2017 2:05 pm
Forum: DSP X7
Topic: Rotary Engraving?
Replies: 20
Views: 3599

Re: Rotary Engraving?

Since RayCam lanced, the 4th axis (U axis) can be used for the rotary. I have answered it so many times if you were on this forum. In order to upgrade your X7 to run on Raycam, you need to send your card to upgrade it. You pay return shipping cost and $5 handling fee. We don't charge labor to do th...
by TheSniper
Sat Nov 04, 2017 4:25 pm
Forum: DSP X7
Topic: Rotary Engraving?
Replies: 20
Views: 3599

Re: Rotary Engraving?

Techgraphix wrote:
Tech_Marco wrote:Two bottles is good enough to knock me down :lol:

What do you drink? 11% 1 liter bottles? ;)
( :oops: back to topic...)
Kees


Yeah Marco! what exactly is that you drink only 2 bottles of? hammer hammer
by TheSniper
Fri Nov 03, 2017 4:22 pm
Forum: DSP X7
Topic: Rotary Engraving?
Replies: 20
Views: 3599

Re: Rotary Engraving?

I don't know what is wrong here?! I always allow my customer to send the card back for upgrade, didn't even read my posts before? And instead of charging $30, I only asked my customers to pay for the shipping and basic $10 for handling fee? Did I ask too much? If you still think that $10 still cost...
by TheSniper
Fri Nov 03, 2017 12:18 pm
Forum: DSP X7
Topic: Rotary Engraving?
Replies: 20
Views: 3599

Re: Rotary Engraving?

The new feature launched on Oct 2016! I don't promise n one that the U axis for rotary would be installed or whatever, I only told that the feature was on my wising list to get the programmer to add it. You have a whole year to get send it to me for upgrade but you didn't and now getting pissed on ...
by TheSniper
Fri Nov 03, 2017 11:57 am
Forum: DSP X7
Topic: Rotary Engraving?
Replies: 20
Views: 3599

Re: Rotary Engraving?

When did you purchase it? What is your order number? Raycam doesn't cost any $ and you're free to download it I have mentioned that for certain customers (within certain time), they can send the card back to me to upgrade. Order:206403 09/03/2015. But last I recall (I've been following the Ray Cam ...
by TheSniper
Fri Nov 03, 2017 11:38 am
Forum: DSP X7
Topic: Rotary Engraving?
Replies: 20
Views: 3599

Re: Rotary Engraving?

You can't use U axis for rotary on X7 without running Raycam. You have to setup 'Y' axis or 'X' for that purpose. Marco Thanks for the reply, But then why when I purchased it it did say it supported a "U Axis / Rotary axis" you have now changed the website to say it must use "Raycam&...
by TheSniper
Thu Nov 02, 2017 2:01 pm
Forum: DSP X7
Topic: Rotary Engraving?
Replies: 20
Views: 3599

Re: Rotary Engraving?

Since RayCam lanced, the 4th axis (U axis) can be used for the rotary. I have answered it so many times if you were on this forum. In order to upgrade your X7 to run on Raycam, you need to send your card to upgrade it. You pay return shipping cost and $5 handling fee. We don't charge labor to do th...
by TheSniper
Fri Sep 29, 2017 4:47 pm
Forum: DSP X7
Topic: Auto Focus info????
Replies: 1
Views: 384

Auto Focus info????

All, Im endeavoring to add a capacitance sensor to my Machine as the auto focus switch. While I found a few posts even by Marco testifying that it works. I have found nothing regarding 1 the wiring of "any sensor" and 2: nothing regarding how the Auto Focus works. I am mystified . the X7 a...
by TheSniper
Sun Dec 18, 2016 4:21 pm
Forum: Tips and new on the DSP & Software
Topic: When will the new Software arrive and how will I get a copy
Replies: 18
Views: 4915

Re: When will the new Software arrive and how will I get a copy

mikerosati wrote:Has this thread died? I'd be interested in firmware updates for my board as well..


No definitive answer from Marco. I started the first "When?" back in March it been more then 9 months.
like watching paint dry.
by TheSniper
Sat Sep 10, 2016 11:09 am
Forum: DSP X7
Topic: Looking for a new name for LaserCad
Replies: 49
Views: 10007

Re: Looking for a new name for LaserCad

Raycast?
My first instinct Says? No...
Does not sound laser like Nor does it sound cad like.
Just my opinion.
-Sam
by TheSniper
Mon Aug 15, 2016 8:21 pm
Forum: Tips and new on the DSP & Software
Topic: When will the new Software arrive and how will I get a copy
Replies: 18
Views: 4915

Re: When will the new Software arrive and how will I get a copy

Marco, Curious hows this coming. I see its been many months Not to be critical or anything. but its hard to stay excited in this fast paced world. Im reluctant to send my controller back. is it possible to just buy the controller head? or board no other parts? and just swap the boars and or head? if...

Go to advanced search