Search found 4361 matches

by Tech_Marco
Sat Jun 23, 2018 9:44 pm
Forum: Tips and new on the DSP & Software
Topic: Raycam back to Lasercad Steps.
Replies: 4
Views: 71

Re: Raycam back to Lasercad Steps.

As opposite, we don't support LaserCad no more
The Raycam is supported but we don't provide an upgrade from LaserCad to Raycam. If you need to switch back to LaserCad, we can send you a patch. After downgraded, you can use LaserCad

Marco
(In Japan)
by Tech_Marco
Sat Jun 23, 2018 9:04 pm
Forum: Tips and new on the DSP & Software
Topic: Raycam back to Lasercad Steps.
Replies: 4
Views: 71

Re: Raycam back to Lasercad Steps.

Hi Sam It has been almost two years after Raycam launched for X7. We decided not to provide LaserCad switch over service no more. It is because there were so much work involved and not all people like the Raycam over the LaserCad after upgraded. One guy got upset because Y movement is disabled once ...
by Tech_Marco
Fri Jun 22, 2018 5:59 pm
Forum: D40/K40 small chinese CO2 laser machine
Topic: Z Table Dip Switch Settings
Replies: 3
Views: 137

Re: Z Table Dip Switch Settings

You may test the motor movement before putting it into the Z table. That way you can tell if connection is correct or not. Also, check the motor wire pair. Sometime the motor wire terminal mapping sequences is different . Example:
A+A-, B+B- or. A+ B+ ,A- B-

Marco
by Tech_Marco
Tue Jun 19, 2018 4:14 pm
Forum: CO2 Laser Discussion
Topic: Real time auto focus tracking system for CO2 laser
Replies: 13
Views: 1280

Re: Real time auto focus tracking system for CO2 laser

We are in the process setting it up for video. Hopefully we can run the basic demo in this week. Then, we will try to make an mounting bracket for real test afterward I am taking a vacation to Japan, Taiwan, Hong Kong :D Then, I will spend two weeks in China trying to finalize the design. We are thi...
by Tech_Marco
Tue Jun 19, 2018 3:59 pm
Forum: DSP T9
Topic: Any tips in preparing Adobe Illustrator artwork?
Replies: 6
Views: 129

Re: Any tips in preparing Adobe Illustrator artwork?

If ou chosen English and it still showing Chinese. I found that it was caused by the window security. What you need to do is to copy the English language from the installation folder and paste it into the folder that you installed will fix it. It happened not only to Lasersoft but to the LaserCad an...
by Tech_Marco
Tue Jun 19, 2018 10:53 am
Forum: DSP T9
Topic: Any tips in preparing Adobe Illustrator artwork?
Replies: 6
Views: 129

Re: Any tips in preparing Adobe Illustrator artwork?

When you save the file, it allows you to select version to save as , choose very 8.0 is the most stable for most laser controller. We are working with then programmer and hope to get one out to support more update Illustrator.

Marco
by Tech_Marco
Mon Jun 18, 2018 9:28 pm
Forum: DSP T9
Topic: Any tips in preparing Adobe Illustrator artwork?
Replies: 6
Views: 129

Re: Any tips in preparing Adobe Illustrator artwork?

Save it in Illustrator version V8.0 and give it a try

Marco
(in Japan)
by Tech_Marco
Fri Jun 15, 2018 12:12 pm
Forum: CO2 Laser Discussion
Topic: Real time auto focus tracking system for CO2 laser
Replies: 13
Views: 1280

Re: Real time auto focus tracking system for CO2 laser

Yes, it is completed and in final testing phase. It works really good if you're cutting speed is under 30mm/s. The reason I didn't launch it yet becauseI found that if the cutting speed is 50mm/s of faster, the speed of the powered telescope couldn't catch up. But the true is that, In reality you ha...
by Tech_Marco
Wed Jun 13, 2018 2:59 pm
Forum: CO2 Laser Discussion
Topic: Real time auto focus tracking system for CO2 laser
Replies: 13
Views: 1280

Re: Real time auto focus tracking system for CO2 laser

Which one, real time tracking or one time passive through Z table ? Passive one is here and ready to sell. The real time tracking still need a little fine tuning even though is full functioning now. I want to improve the speed response from 30mm to 50mm. Am I a little greedy? ! :P

Marco
by Tech_Marco
Tue Jun 12, 2018 10:45 am
Forum: DSP T9
Topic: t9 Upgrade - Laser Won't Fire
Replies: 14
Views: 1051

Re: t9 Upgrade - Laser Won't Fire

No, use the default driver. Sometimes Windows do weird things on driver.

Marco
by Tech_Marco
Tue Jun 12, 2018 9:40 am
Forum: DSP T9
Topic: t9 Upgrade - Laser Won't Fire
Replies: 14
Views: 1051

Re: t9 Upgrade - Laser Won't Fire

If you can fire the laser by pressing the Laser button on the LCD control board, it means that the system is ready to some extend. Check your laser power setting, and if you enabled the layer (a square check box next to the layer distinguish by colors).

Marco
by Tech_Marco
Mon Jun 11, 2018 8:40 pm
Forum: DSP T9
Topic: t9 Upgrade - Laser Won't Fire
Replies: 14
Views: 1051

Re: t9 Upgrade - Laser Won't Fire

Check water protection. On your laser power supply, there should be a terminal named " WP" which is used for the water sensor control input. If you haven't any water sensor installed in your machine, you may connect it to Ground to enable then laser power supply. If it is not water protect...
by Tech_Marco
Sun Jun 10, 2018 4:17 pm
Forum: D40/K40 small chinese CO2 laser machine
Topic: X7 DSP wiring to the K40 power module- Not firing
Replies: 11
Views: 432

Re: X7 DSP wiring to the K40 power module- Not firing

You need to 'Save' the new um after change. I believed that you missed one step and end up the um wasn't saved. If you're talking about double image that was caused by backslash, then I'll consider of losing focus lens. Unscrew the laser head out and shake it see if you hear noise. If you did, then ...
by Tech_Marco
Sat Jun 09, 2018 9:18 am
Forum: D40/K40 small chinese CO2 laser machine
Topic: X7 DSP wiring to the K40 power module- Not firing
Replies: 11
Views: 432

Re: X7 DSP wiring to the K40 power module- Not firing

Never heard that it could do engraving twice without the fulfillment I mentioned

Marco
by Tech_Marco
Sat Jun 09, 2018 8:43 am
Forum: D40/K40 small chinese CO2 laser machine
Topic: X7 DSP wiring to the K40 power module- Not firing
Replies: 11
Views: 432

Re: X7 DSP wiring to the K40 power module- Not firing

Either you may have double image or the number count was set to 2. BTW, check your focus because even with two engraving, the result shouldn't be blurry at all

Marco

Go to advanced search