Search found 8 matches

by musher2d
Wed Jan 24, 2018 6:39 am
Forum: DSP T9
Topic: Fusion 360 to T9 DSP controller
Replies: 3
Views: 707

Fusion 360 to T9 DSP controller

Just seeing if anyone has been able to get jobs from Autodesk Fusion 360 to their laser cutter....If so what post processor settings are you using and any other suggestions would be greatly appreciated
by musher2d
Sun Jan 14, 2018 8:51 am
Forum: Tips and new on the DSP & Software
Topic: Start etching from bottom and Etching Effieciently
Replies: 1
Views: 573

Re: Start etching from bottom and Etching Effieciently

I’m very new to the laser game but I have found if you set each etching box as a different color or layer with the same settings it seems to see it as separate operations and will etch one at a time.
by musher2d
Wed Jan 10, 2018 11:20 am
Forum: DSP T9
Topic: trouble after homing
Replies: 3
Views: 620

Re: trouble after homing

Will after going round and round i finally gave up and set the homing direction away from the stops and set the direction of the motors so that it was counting in the right direction. when i turn on the machine i stop the homing process and set the origin and just use the software limits. I am use t...
by musher2d
Wed Jan 03, 2018 7:10 am
Forum: DSP T9
Topic: trouble after homing
Replies: 3
Views: 620

Re: trouble after homing

Still not acting right I have the datum and the motors going the right direction and have tried to stop the homing process and set the origin but it still wants to continue to going into the stops after it has touched off. I have the home set to the upper left and I notice that the counter on the T9...
by musher2d
Tue Jan 02, 2018 7:26 am
Forum: DSP T9
Topic: trouble after homing
Replies: 3
Views: 620

trouble after homing

When I turn on the DSP controller it runs thru the homing sequence X+Y axes move slow towards the limit switches (in the top Left) both touch the limit switches then back off a little then touch again....Then the Y axes takes off full speed back into the limit switch. The X axes just stays put. I ca...
by musher2d
Mon Dec 25, 2017 6:57 am
Forum: Tips and new on the DSP & Software
Topic: Lasersoft wont install with windows 10????
Replies: 4
Views: 745

Re: Lasersoft wont install with windows 10????

Finally got it..... had to uninstall everything and reinstall but it worked great. Now to have some fun :D
by musher2d
Thu Dec 21, 2017 5:36 am
Forum: Tips and new on the DSP & Software
Topic: Lasersoft wont install with windows 10????
Replies: 4
Views: 745

Re: Lasersoft wont install with windows 10????

Made a little success last night. When i downloaded Lasersoft i had to go into the zip folder properties and unblock it but apparently when i unzipped it windows put that folder into read only. After unchecking the read only box i was able to get lasersoft installed. The drivers failed to install bu...
by musher2d
Wed Dec 20, 2017 2:07 pm
Forum: Tips and new on the DSP & Software
Topic: Lasersoft wont install with windows 10????
Replies: 4
Views: 745

Lasersoft wont install with windows 10????

Hopefully a quick fix. I am trying to install lasersoft on my laptop but i am getting an error of (the requested operation requires elevation) i looked at the driver release notes file and it only supports up to windows 8 (i have win10). I have gone to http://www.ftdchip.com and downloaded the newes...

Go to advanced search